Synthesis of conjugated diacetylene, metal-chelating monomers for polymerizable monolayer assemblies

[see structure]. Self-assembled monolayers (SAMs) of thiols on gold have been used for numerous applications. For protein targeting applications, one successful strategy is to use a metal-chelating SAM. It has also been demonstrated that polymerized SAMs are much more stable than non-polymerized counterparts. We report herein, the synthesis of several polymerizable, metal-chelating thiols capable of complexing luminescent lanthanide ions.     

New Factorial Designs to Evaluate Chemisorption of Divalent Metals on Aminated Silicas

Adsorption processes of Cu(II), Co(II), and Hg(II) on two aminated silica gel surfaces with immobilized ethylenediamine and diethylenediamine groups were studied by a new 2(3) full factorial design. Two metal quantity levels, temperatures of 25 and 50 degrees C, and silica amounts of 100 and 200 mg were employed. Our study indicates that higher factorial design levels increase adsorption for all metals evaluated, with the exception of the mass parameter. Adsorption is also significantly affected by important antagonistic and synergistic effects involving all factors. Both functionalized silica gel surfaces present higher interactions and good perspectives in preconcentration studies for mercury. The factorial design results are also discussed in terms of some solvation properties for each of the metals studied. Copyright 2001 Academic Press.     

Thermodynamics of 1,10-phenanthrolinium ion and ferrous-1,10 phenanthroline complex in dioxane—water and ethanol—water at 25°c

Enthalpies of formation of 1,10-phenanthrolinium ion and ferrous-1,10-phenanthroline (tris) complex in dioxane—water and ethanol—water media at 25°C have been determined by calorimetry. Results are discussed in the light of ion—solvent and solvent—solvent interactions.     

Ultraviolet protection factors for clothing: an intercomparison of measurement systems

In recent years the need to standardize measurement protocols for quantifying the degree of ultraviolet radiation (UVR) protection provided by clothing has led to the introduction of a number of standards around the world. To date, these standards have specified spectral measurements of UVR transmission by clothing and fabrics. Development of a standard test method has become an important part of the testing process, and this article presents results from an intercomparison involving 10 independent testing laboratories and 11 different UVR transmission measurement instruments. In addition to comparing the measured ultraviolet protection factors (UPF), this intercomparison also incorporates detailed scan results from all 10 laboratories and highlights differences in performance of the various instruments in different wavelength regions. Careful examination of these differences can indicate where changes to the systems could be made to allow improvements both in equipment performance and in agreement of the final results. The variability in the measurements of UPF in this study suggest that the protection categories in standards may need to be broadened.     

Effect of trace amounts of water on organic solvent transport through gamma-alumina membranes with varying pore sizes

The transport behavior of toluene and n-hexane in gamma-alumina membranes with different pore diameters was studied. It was shown that the permeability of water-lean hexane and toluene is in agreement with Darcy's law down to membrane pore diameters of 3.5 nm. The presence of molar water fractions of 5-8 x 10(-4) in these solvents led to a permeability decrease of the gamma-alumina layer by a factor of 2-4 depending on pore size. In general, a lower permeability was found for hexane than for toluene. Moreover, in the presence of water a minimum applied pressure of 0.5-1.5 bar was required to induce net liquid flow through the membrane. These phenomena were interpreted in terms of capillary condensation of water in membrane pores with a size below a certain critical diameter. This is thought to lead to substantial blocking of these pores for transport, so that the effective tortuosity of the membrane for transport of hydrophobic solvents increases.     

Stability and reactivity of all-metal aromatic and antiaromatic systems in light of the principles of maximum hardness and minimum polarizability

It is demonstrated that among various possible isomers of all-metal aromatic compounds such as Al(4)(2-) and their complexes the most stable isomer with the minimum energy is the hardest and the least polarizable. A similar situation is observed for different isomers of all-metal antiaromatic compounds such as Al(4)(4-) and their complexes. It is shown that linear Al(4)(4-) is energetically more stable than its cyclic isomer. The reaction energies associated with the complexation processes highlight the stability of those complexes. The difference in energy, hardness, and polarizability between a cyclic molecule and its linear counterpart convincingly shows that an aromatic molecule exhibits negative changes in energy and polarizability but positive changes in hardness as expected from the principles of minimum energy, minimum polarizability, and maximum hardness. Although the aromaticity of Al(4)(2-) is unequivocally established through this study, the antiaromaticity picture in the case of Al(4)(4-) is shown to be poorly understood;however, the present analysis sheds light on this controversy.     

Spectrophotometric determination of platinum in glass after extraction with polyurethane foam

A spectrophotometric method has been developed for determination of trace amounts of platinum in glass. The method is based on the extraction of platinum(II) from 1M hydrochloric acid containing 0.2M stannous chloride and 4 x 10(-4)M dithizone onto polyurethane foam, elution with acetone (containing 3% v/v concentrated hydrochloric acid) and measurement of the absorbance of the eluate at 530 nm. Beer's law is obeyed up to 10.0 microg/ml Pt. The minimum platinum level in the eluate that can be determined by this method is 0.1 microg/ml.     

SINGLET OXYGEN YIELDS AND RADICAL CONTRIBUTIONS IN THE DYE-SENSITISED PHOTO-OXIDATION IN METHANOL OF ESTERS OF POLYUNSATURATED FATTY ACIDS (OLEIC, LINOLEIC, LINOLENIC AND ARACHIDONIC)

Abstract— The triplet state characteristics (spectrum, lifetime and quantum yield) for four dye sensi tisers [methylene blue (MB), erythrosin (ER), haematoporphyrin (HP) and riboflavin (RF)] were determined in methanol by laser flash photolysis and singlet oxygen yields (0.60 to 0.48) from time-resolved measurements of the 1270 nm near infrared emission. The reaction of singlet oxygen with four long chain unsaturated phenyl esters [oleate (18: 1), linoleate (18: 2), linolenate (18: 3) and arachidonate (20: 4)] was followed quantitatively using the singlet oxygen luminescence technique and also, after continuous420–700 nm irradiation, by HPLC and other analysis of the isomeric product monohydroperoxides. The overall quantum yield of photooxidation (∼10^-2) was shown to be consistent with the observed singlet oxygen quenching constants(2–12 times 10⁴ dm³ mol^-1 s^-1) for the four esters studied and the singlet oxygen lifetime in methanol (τ∼ 9 μs). The isomer product distribution was interpreted in terms of a dual singlet oxygen and radical mechanism, the radical contribution increasing with sensitiser in the order ER = MB < HP ≪ RF, but also showing some dependence on substrate unsaturation. Evidence is presented for singlet oxygen quenching by MB and RF ( k_O = 1.6 and 6.0 times 10⁷ dm³ mol^-1 s^-1) and for the accelerated photobleaching of the dye sensitisers in the presence of the unsaturated esters.     

Separation of antimony(III) with iodide and dithizone by sorption on polyurethane foam from sulphuric acid medium for its spectrophotometric determination in glasses

A method for quantitative separation of antimony(III) by sorption on polyether based polyurethane foam and its spectrophotometric determination has been described. The method involves formation of a pink-red complex of antimony(III) with iodide (0.045M) and dithizone (2.3 x 10(-5)M) in 0.25-0.75M H(2)SO(4) medium, sorption of the complex on polyurethane foam (within 45 min) at room temperature followed by its elution with acidified acetone (acetone containing 0.008% H(2)SO(4)) and spectrophotometric measurement at 507.2 nm ( = 2.56 x 10(4) l mol cm). The method obeys Beer's law from 0.1 to 6.0 mug antimony(III). Tolerance limits of other ions are Co (100 mug), Ni (100 mug), Fe (10 mug), Cu (0.5 mug), Sn (20 mug), Zn (100 mug), As (100 mug), Mn (200 mug), Pb (50 mug), Ti (100 mug), V (50 mug), etc. Interference by iron and copper have been eliminated by treating with KOH prior to the extraction of antimony. The method has been standardized with glass samples spiked with known amounts of antimony and applied to the determination of antimony in various glasses.     

Cationic vesicles as chiral selector for enantioseparations of nonsteroidal antiinflammatory drugs by micellar electrokinetic chromatography

A vesicle-forming chiral cationic surfactant (1R,2S)-(-)-N-dodecyl-N-methyl-ephedrinium bromide was evaluated as a pseudo-stationary phase in micellar electrokinetic chromatography (MEKC) for enantioseparation of eight non-steroidal anti-inflammatory drugs e.g., carprofen, flurbiprofen, fenoprofen, ibuprofen, indoprofen, ketoprofen, naproxen and suprofen by capillary electrophoresis. The effects of varying experimental conditions such as pH and concentration of surfactant in the running buffer on the enantiomer separation of the drugs are reported. A mixture of five of the above drugs was separated and each enantiomeric pair was also separated simultaneously in a single run by use of the surfactant. The strong electrostatic interactions between the analytes and the vesicles seemed to have a major role in the enantiomeric separation of the profens.